Burlington fence builds that don't lean a season after we leave.
A Burlington fence job is a post-and-footing job pretending to be a carpentry job. If the posts aren't set below frost line in properly cured concrete, nothing else matters — the whole thing is going to lean and gap within a year or two. We dig to depth, we set properly, and we build the pickets and rails like they're going to be there for twenty years.
We respond to inbound within one business day — usually same day.
Fences in Burlington — what makes this build hold up.
- Posts set below Burlington's frost line (typically 48") in properly cured concrete
- Cedar privacy, horizontal plank modern, pressure-treated board-on-board, powder-coated aluminum
- Both sides finished — no ugly-stringer face toward the neighbour
- City of Burlington bylaw check — height, setback, corner-lot visibility — before the first dig
- Lakefront + Aldershot wind-exposure sites get upgraded post sizing and bracing where needed
- Gate hardware (soft-close, self-closing, powder-coated) + integrated pool-code compliance
Burlington lot variety makes fence specs vary job to job
A downtown Burlington semi has a tight lot and a shared property line that demands exact survey compliance. An Aldershot larger lot might be 150+ feet of run with grade changes that force stepped sections. An Alton Village subdivision has straight-line runs but strict HOA-style aesthetic rules on some streets.
We walk the line, measure, check the bylaw, and quote based on your actual conditions. No two Burlington fence quotes come out the same because no two lots do.
The build process end to end
Free visit, written quote in 72 hours including bylaw check (height, setback), style options, gate configuration, and material line items. Property survey review if we're near a tight lot line.
On site: usually 3-7 days end to end. Dig day one, concrete sets day two, assembly days three through five or six depending on run length. We clean up every evening — you don't live inside a construction site for a week.
What people in Burlington usually ask.
- What's Burlington's maximum fence height?
- City of Burlington typically permits 2.0m in rear yards and 1.2m in front yards. Corner lots and pool-enclosure fences have specific additional rules. We handle the bylaw check as part of the quote.
- Do I need a permit for a fence in Burlington?
- Fences up to standard height don't require a permit, but setback and height rules still apply. Pool-enclosure fences have specific compliance requirements that we handle. We flag what applies to your project at the site visit.
- Can you build a fence that works around a mature tree on the property line?
- Yes — we work around established root zones all the time. We can jog the fence line, cantilever a panel, or use adjustable post hardware that doesn't force trenching into roots.
- What are my options for a Burlington backyard pool fence?
- Burlington pool-enclosure fences require minimum 1.5m height, no horizontal climbing surfaces on the pool-facing side, and self-closing self-latching gate hardware. Common build-outs are powder-coated aluminum ornamental (sees through to the yard, meets code cleanly), horizontal-plank with top-mounted hardware, or cedar privacy with code-compliant gate assembly. We confirm the exact municipal requirement before quoting.
Other services here
Get a quote for fences in Burlington.
Tell us what you’re working on. We’ll come out, measure, talk through options, and send a written quote with material line items itemized within 72 hours.
- Prefer to call?(416) 555-0199
- Free site visit; written quote within 72 hours.